This document contains the download links for the AOR-IP-CSE configuration Utilities

AOR-IP-CSE Application download (Non Web Interface Version)

Main Programmer
https://drive.google.com/file/d/1w9ZWnv6FSUnf0vpM0gzPfT8PpyzBH1rL/view?usp=drive_link

After completing initial install Update to programmer replace original executable 
(C:\Program Files (x86)\Talkaphone) with the file in this zip

Bonjour if needed:

    • Related Articles

    • Configur AOR-IP-CSE Revision 2

      Download the configuration app and update from this article: AOR-IP-CSE Appilictaion download (Non Web Interface Version) 1. Launch the Talkaphone Programming software. 2. Select the device you wish to program. 3. Click the Connect button. 4. If you ...

    • Area of Rescue Command Unit Installation Guide for Model AOR-8 and Model AOR-16

      Important Notice THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE ...

    • Unable to access the VOIP Call Station Web GUI Application

      Unable to access the VOIP Call Station Web GUI Application Possible Resolutions: The IP address being used in the Web browser is incorrect. Connect the serial console and check the phone’s IP address via the ‘ifconfig’ command. IP address of the ...

    • Unable Make Outside Call on AOR-5 or AOR-10 Series System.

      1. Is the outside line status light turning on? No: Does the line have working Dial tone? If yes proceed to the next step. If no , then address issue with the phone line first. A. Check to make sure the phone line is connected to the PSTN terminals. ...

    • Troubleshooting AOR Series Trouble Lights

      PURPOSE The purpose of this document is to explain the various reasons for trouble status Lights on the AOR series Command Unit. This includes the AOR-8, AOR-16, AOR-24, and AOR-32. The AOR command units will test the circuit integrity from the main ...