How can I have multiple Talkaphone Call Stations use a single TELCO or PBX phone line?
How can I have multiple Talkaphone Call Stations use a single TELCO or PBX phone line?
Answer:
Each Talkaphone Call Station requires either a dedicated TELCO phone line or analog PBX extension.
However, using the EC-2 or EC-8 Consolidator you can connect up to two (2) or eight (8) Talkaphone Call Stations respectively onto a single line.
 EC-8 Consolidator |  EC-2 Consolidator |
If you need additional assistance, please email us at support@talkaphone.com or call 773-539-1100 and select Technical Support.
Related Articles
Programming ETP Series Phones using the local phone on a EC-8 Consolidator
What is the BASIC programming codes for the analog (ETP) devices by using the local phone on a EC-* Consolidator? Resolution: What you will need: Analog telephone or test-set to dial in access to the ETP device When using an EC-8, connect the local ...I have made several mistakes in programming my ETP Call Station and/or I don't know what has been programmed into my phone. Can I start over from the factory settings?
I have made several mistakes in programming my ETP Call Station and/or I don't know what has been programmed into my phone. Can I start over from the factory settings? Answer: There is no programming code that resets you phone to factory settings. ...What is the TELCO OUT port used for on an EC-8?
What is the TELCO OUT port used for on an EC-8? Answer: Another telephone instrument (e.g. fax , modem, standard telephone, etc.) can share the outside phone line with the EC-8 by connecting the outside phone line to the “TELCO IN” port on the EC-8 ...If I have more than one consolidator can I connect them to the same phone line either in parallel or in series (using a “daisy chain”)?
If I have more than one consolidator can I connect them to the same phone line either in parallel or in series (using a “daisy chain”)? Answer: Each consolidator requires its own phone line or local phone. If you need additional assistance, please ...BASIC Programming of Analog (ETP) Call Stations
What is the BASIC programming codes for the analog (ETP) devices? Resolution: What you will need: Analog telephone or test-set to dial in access to the ETP device The BASIC of QUICK programming for analog ETP devices is as follows: Default ...