How do I factory reset a VOIP-200 Call Station?

How do I factory reset a VOIP-200 Call Station?

How do I factory reset a VOIP-200 Call Station?

Answer:

Reset to Factory Default Settings with Static IP

1. While pressing the call button, power up the substation.
2. When the substation LED starts blinking, release the call button after exactly 2 blinks.
3. Let the LED blink for exactly 2 more times, then press the button again.
4. Keep the button pressed until the LED blinks fast 2 times indicating a successful reset with static IP.
5. Release the button and the substation will restart with the factory default settings.

Default login credentials on start up with Static IP-Station IP address: 192.168.1.10
Username: admin
Password: admin@123


Reset to Factory Default Settings with Activated DHCP

1. While pressing the call button, power up the substation.
2. When the substation LED starts blinking, release the call button after exactly 2 blinks.
3. Let the LED blink for exactly 4 more times, then press the button again.
4. Keep the button pressed until the LED blinks fast 4 times indicating a successful reset with activated DHCP.
5. Release the button and the substation will restart with the factory default settings.

Default login credentials on start up with DHCP-Station IP address: As acquired from the DHCP server
Username: admin
Password: admin@123


If you need additional assistance, please email us at support@talkaphone.com  or call 773-539-1100 and select Technical Support. 

If you need additional assistance, please email us at support@talkaphone.com  or call 773-539-1100 and select Technical Support.