Serial Connection Settings for the DB9 Console Port on VOIP-500-600 Call Stations

• Related Articles

• What are the SERIAL settings for the VOIP-500 and VOIP-600 for console connectivity?

  What are the SERIAL settings for the VOIP-500 and VOIP-600 for console connectivity? Answer: Using your favorite console/terminal software, configure your serial settings to the following: Speed (baud rate): 115200 Data Bits: 8 Stop bits: 1 Parity: ...

• How to find out the IP Address acquired by the VOIP-500/VOIP-600 IP Call Stations from the DHCP server using Serial connection?

  Requirements: Serial connection to the VOIP-500 or VOIP-600 FTP server that supports receiving files via ftpput.  Filezilla will support this Power supply or POE switch Network connection to VOIP-500 or VOIP-600. Procedure: 1.  Connect a ...

• How to do a packet capture on the VOIP-500/VOIP-600 Series IP Call Stations using tcpdump?

  1.    Login to the VOIP-500/VOIP-600 Call Station console either by using a Serial cable or through SSH. 2.    Navigate to the /flash directory- root:/> cd /flash 3.    Run the command to start capturing packets- root:/flash> tcpdump -w call1.pcap ...

• VOIP-500 and VOIP-600 Installation Guide

  Call Station Installation Guide for Model VOIP-500 and Model VOIP-600 To jump to the INSTALLATION Steps, use the Table of Contents links. Overview and Intended Audience This guide provides detailed instructions for the configuration and operation of ...

• Run a Digital Output script from a call originated from an AVM-1 to the VOIP-200/VOIP-500/VOIP-600 IP Call Stations

  To call into the VOIP-200/VOIP-500/VOIP-600 IP Call Stations from the AVM-1, select IP Call from the drop-down. Then put in the IP address of the IP Call Station(use * for a dot on the soft keypad on the AVM-1). The IP Call Station will auto-answer ...