What are the SERIAL settings for the VOIP-500 and VOIP-600 for console connectivity?
What are the SERIAL settings for the VOIP-500 and VOIP-600 for console connectivity?
Answer:
Using your favorite console/terminal software, configure your serial settings to the following:
Speed (baud rate): 115200
Data Bits: 8
Stop bits: 1
Parity: None
Flow Control: None
For reference:
If you need additional assistance, please email us at support@talkaphone.com or call 773-539-1100 and select Technical Support.
Related Articles
Serial Connection Settings for the DB9 Console Port on VOIP-500-600 Call Stations
Serial Connection Settings for the DB9 Console Port on VOIP-500-600 Call Stations Resolution: The DB9 Connection is a FEMALE connection requiring a straight-through serial cable with a MALE connection for the Call Station side. The settings are: Baud ...VOIP-500 and VOIP-600 Installation Guide
Call Station Installation Guide for Model VOIP-500 and Model VOIP-600 To jump to the INSTALLATION Steps, use the Table of Contents links. Overview and Intended Audience This guide provides detailed instructions for the configuration and operation of ...How to find out the IP Address acquired by the VOIP-500/VOIP-600 IP Call Stations from the DHCP server using Serial connection?
Requirements: Serial connection to the VOIP-500 or VOIP-600 FTP server that supports receiving files via ftpput. Filezilla will support this Power supply or POE switch Network connection to VOIP-500 or VOIP-600. Procedure: 1. Connect a ...How to do a packet capture on the VOIP-500/VOIP-600 Series IP Call Stations using tcpdump?
1. Login to the VOIP-500/VOIP-600 Call Station console either by using a Serial cable or through SSH. 2. Navigate to the /flash directory- root:/> cd /flash 3. Run the command to start capturing packets- root:/flash> tcpdump -w call1.pcap ...VOIP-500/VOIP-600 series integration with InformaCast using SLP
Make sure that the InformaCast environment is setup per Singlewire's instructions and that the multicast functionality has been verified. With a VOIP-500, VOIP-600, WEBS-PA1, or WEBS-PA-2IP running firmware 1.0.2.8 or later apply ...