What is the circuit board layout of the Talkaphone VOIP-500/600 Call Station?
What is the circuit board layout of the VOIP-500/600 Call Station?
Answer:
The layout of the VOIP-500/600 is shown here:
If you need additional assistance, please email us at support@talkaphone.com or call 773-539-1100 and select Technical Support.
Related Articles
VOIP-500 and VOIP-600 Installation Guide
Call Station Installation Guide for Model VOIP-500 and Model VOIP-600 To jump to the INSTALLATION Steps, use the Table of Contents links. Overview and Intended Audience This guide provides detailed instructions for the configuration and operation of ...How to do a packet capture on the VOIP-500/VOIP-600 Series IP Call Stations using tcpdump?
1. Login to the VOIP-500/VOIP-600 Call Station console either by using a Serial cable or through SSH. 2. Navigate to the /flash directory- root:/> cd /flash 3. Run the command to start capturing packets- root:/flash> tcpdump -w call1.pcap ...How do I factory reset a VOIP-200 Call Station?
How do I factory reset a VOIP-200 Call Station? Answer: Reset to Factory Default Settings with Static IP 1. While pressing the call button, power up the substation. 2. When the substation LED starts blinking, release the call button after exactly 2 ...VOIP-200 series PCB
Serial Connection Settings for the DB9 Console Port on VOIP-500-600 Call Stations
Serial Connection Settings for the DB9 Console Port on VOIP-500-600 Call Stations Resolution: The DB9 Connection is a FEMALE connection requiring a straight-through serial cable with a MALE connection for the Call Station side. The settings are: Baud ...