Auxiliary Master Station
AOR-IP Operating Instructions
AOR-IP Series Command Unit Operating Instructions Master Telephone and Extension Button Panels Station Buttons/Status Indicators Green LED light on an individual station button, indicates that that station is registered to the system, and not ...
AOR-IP-CSE Revision 1 Call station Configuration
This article assumes that the suggested default IP scheme for the AOR-IP series is being used. The IP scheme can be found here . This article is for the first version of the AOR-IP-CSE That is based on the PCB with P/N 68820, It has two network ports ...
AOR-IP Series Recommended IP Address Scheme
This article provides the recommended default IP addressing scheme for use with AOR-IP Series devices. The default IP address of the AOR-IP-CSE Series Call Stations is 192.168.1.10. This overlaps with with Extension 1010 in order to have enough ...
AOR-IP Auxiliary Master Station
Configuring the Auxiliary Master Station The Auxiliary Master station comes configured to support up to 160 call stations and configured to import the names of the call stations from the Command Unit. The IP address, sip credentials and number of ...
AOR-IP Auxiliary Command Unit (ACU) Installation
This document covers the physical installation of the following AOR-IP Auxiliary Command Unit models: AOR-IP-40-ACU AOR-IP-80-ACU AOR-IP-120-ACU AOR-IP-160-ACU Fasteners The AOR-IP Command units can be surface mounted or flush mounted, as the ...
AOR-IP Series Master Document
This document contains the links to other relevant documentation for the installation and configuration of the various components of the AOR-IP series AOR-IP Command Units (AOR-IP-40-CU, AOR-IP-80-CU, AOR-IP-120-CU, AOR-IP-160-CU) Installation AOR-IP ...
Popular Articles
Programming the AOR series, and Analog stations for Day/Night Mode
Programming for an EC-8 or AOR Call into the unit or go off hook on the local phone, be sure and select the correct bank if working with an AOR-16, AOR-14, or AOR-32, and what for three tones. Enter *31** to access programming, wait for a single ...
BASIC Programming of Analog (ETP) Call Stations
What is the BASIC programming codes for the analog (ETP) devices? Resolution: What you will need: Analog telephone or test-set to dial in access to the ETP device The BASIC of QUICK programming for analog ETP devices is as follows: Default ...
What is the SIM Card Size for ETP-GSM (AT&T)
What type of SIM card does the ETP-GSM use for AT&T? ETP-GSM Answer: ETP-GSM uses the STANDARD SIM Card. SIM Card Sizes If you need additional assistance, please email us at support@talkaphone.com or call 773-539-1100 and select Technical Support.
Front status (CALLING and ANSWERED) LED's on VOIP Call Station Flashing
If the front LED's are continuously flashing on a VOIP-500/600 it means the device cannot register to a SIP server, firmware upgrade is in progress OR the device is in a constant reboot cycle due to not being able to obtain a DHCP IP address. ...
ETP-EL Blue Light flashes when not in a call
Issue: ETP-EL Blue Light flashes when not in a call Environment: ETP Towers that have a Blue Light on/in them. Resolution: Disconnect the ORANGE/BLACK from the call station, if flashing stops, possible issue with the call station. If the flashing ...