Set VOIP-200 Series To Ring Until Answered.
Set Buttons(Idle), Button 1, Option to Numberlist 1
Enter the number to be called as Value 1 of Ringlist 1
Mark the Checkbox for Call Until Answer
Set the Ringer Time to a higher number to allow enough rings between each call attempt, 60 seconds to allow 12 rings before restarting the call.
Related Articles
VOIP-500 and VOIP-600 Installation Guide
Call Station Installation Guide for Model VOIP-500 and Model VOIP-600 To jump to the INSTALLATION Steps, use the Table of Contents links. Overview and Intended Audience This guide provides detailed instructions for the configuration and operation of ...How To Install the AVM-1 and the VOIP-20X (with IP Camera) - Peer To Peer
This knowledge article describes the setup of the AVM-1 and the VOIP-20X (With IP Camera) in a peer-to-peer environment: Assumptions: Technician has fundamental knowledge in computer networking and Voice over Internet Protocol (VoIP) technologies is ...How to do a packet capture on the VOIP-500/VOIP-600 Series IP Call Stations using tcpdump?
1. Login to the VOIP-500/VOIP-600 Call Station console either by using a Serial cable or through SSH. 2. Navigate to the /flash directory- root:/> cd /flash 3. Run the command to start capturing packets- root:/flash> tcpdump -w call1.pcap ...How To Install the AVM-1 (GXV3370) and the VOIP-500 or VOIP-600 (with IP Camera) - Peer To Peer
This knowledge article describes the setup of the AVM-1 (GXV3370) and the VOIP-500 or VOIP-600 (With IP Camera) in a peer-to-peer environment: Assumptions: Technician has fundamental knowledge in computer networking and Voice over Internet Protocol ...How To Install the AVM-1 (GXV3275) and the VOIP-500 or VOIP-600 (with IP Camera) - Peer To Peer
This knowledge article describes the setup of the AVM-1 and the VOIP-500 or VOIP-600 (With IP Camera) in a peer-to-peer environment: Assumptions: Technician has fundamental knowledge in computer networking and Voice over Internet Protocol (VoIP) ...