Setting Time/Date on AOR-24-32 Local Phone

• Related Articles

• Area of Rescue Command Unit Installation Guide for Model AOR-8 and Model AOR-16

  Important Notice THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE ...

• Programming ETP Series Phones using the local phone on a EC-8 Consolidator

  What is the BASIC programming codes for the analog (ETP) devices by using the local phone on a EC-* Consolidator? Resolution: What you will need: Analog telephone or test-set to dial in access to the ETP device When using an EC-8, connect the local ...

• Programming the AOR series, and Analog stations for Day/Night Mode

  Programming for an EC-8 or AOR   Call into the unit or go off hook on the local phone, be sure and select the correct bank if working with an AOR-16, AOR-14, or AOR-32, and what for three tones. Enter *31** to access programming,  wait for a single ...

• Configur AOR-IP-CSE Revision 2

  Download the configuration app and update from this article: AOR-IP-CSE Appilictaion download (Non Web Interface Version) 1. Launch the Talkaphone Programming software. 2. Select the device you wish to program. 3. Click the Connect button. 4. If you ...

• Troubleshooting AOR Series Trouble Lights

  PURPOSE The purpose of this document is to explain the various reasons for trouble status Lights on the AOR series Command Unit. This includes the AOR-8, AOR-16, AOR-24, and AOR-32. The AOR command units will test the circuit integrity from the main ...